 |
 |
    |
|
|||
|
|
|
2023 OCP Global Summit for the latest ORv3 Blind Mate QC Updates LATEST NEWS & UPDATES
Now Available!
盲配阀 BMQC
概述 : 这种盲配阀设计由一（ 1 ）个套筒阀和一（ 2 ）个旋塞阀组成。套筒螺纹连接到歧管中，并具有一个双头螺栓和一个 O 形环。插头从内向外穿过 lT 底盘后部金属板上的一个孔安装，并用面板螺母固定到位。请注意，该阀门将在每个阀门的两端安装防尘罩。
Blind Mate Valves (BMQC) Overview This blind mate valve design consists of a (1) socket valve and a (2) plug valve The socket threads intothe manifold and features a threaded stud and an 0-ring. The plug installs through a hole in a sheetmetal panel from the inside out at the rear of the lT chassis and is fixed in place with a panel nut. Notethat the valve will ship with dust covers on both ends of each valve.
The valve pair can accommodate radial misalignment as well as combination of radial and angularmisalignment within a defined zone. The socket valve features a cone to gather and align the pair asthey connect.
Figure 1.1.1 Socket
Figure 1.1.2 Plug
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
